The Innovators: First To Bring You...

TRAPPED MOISTURE VENTILATING SYSTEMS

            

             The Ultimate Drying System

Injectidry's High Pressure drying systems are specifically developed to target high risk areas of hidden moisture such as: walls and ceilings, even those coated with watertight finishes like PVA paint and vinyl wallpaper coverings, double-sheeted fire walls, party walls, sound barriers, insulation, walls behind cabinets and fixtures and floors. CLICK HERE for more information on our Vac-It Panels (hardwood drying accessory  for use with the HP60). The Injectidry ®HP drying system is the only truly "industrial grade" system sold today. The internal blower is a  Regenerative Blower and many operate 20,000 hours or more trouble free. This translates into more than 10 years of continuous operation. It is not a fan that is typically associated with a portable carpet cleaning machine or shop-vac. 
CLICK HERE to see why there is no equal...

SPECS

HP 60i COMES WITH: QTY PART#
Total System Airflow 108 CFM (cubic feet per minute) HP60 Unit 1 INJ01-i
Static Pressure (Maximum) 60 inches (water lift) Main AIR IN Quick Connects Installed 1 PTFC
Weight (blower unit only) 50 lbs Main AIR OUT Quick Connects Installed 1 PTMA
Air Injector Hole 3/16 inch (wall) 1/4 inch (cabinet) Carry Bag 1 CB1
Capacity 134 linear feet (using 1 injector every 16”) Rolling Duffle Bag 1 CB2
Power Draw (115 Volts) 5.6 amps—11 amps (depending on load) Active Hoselines (each having 2 Hosecuffs and 1 QC Hose Connector) 12 AH3
Drying Modes Negatively or Positively AIR OUT Main Hose with factory set PRV and Main Quick Connect T 1 AOMH
Dimensions

18x13x16.2 inches (with pipes)

AIR IN Main Hose with factory set PRV and Main Quick Connect T 1 AIMH
Warranty 7YR-Housing, 3YR-Blower, 1YR Parts– Limited Quick Connect - Manifolds 10 QCM01
 

Click for free Acrobat Reader Download

HP MANUAL 

Quick Connect - Hose Connectors 3 QCC01
Quick Connect - Small T's 2 QCT01
Hosecuffs 10 HC3
Endcap Plugs 4 QCP01
Tubing Connectors 50 RH07A
Tubing Stoppers 50 RP1
Wall Injectors 170 IM06A
Safety Yellow Blank hose (1 1/2" x 50') 1 PL03
Safety Yellow Tubing (3/8 x200') 2 RH05A
Manual and CD
  • Patent #US5893216, #6647639 and Patent Pending

1

 

 

   
Active Hoseline© Upgrade Kits

Upgrade your"Original" HP's and cut your setup in half with this package! Active Hoseline comes with hose, inserts, tubing and injectors connected.  SAFETY FIRST! Check out our job photos; showing uncluttered traffic lanes.

 The  injector delivers dry air into the wall cavity (or removes wet air if used on suction), exchanging wet air with dry, 30-90 times per hour. 
Kit includes:

  • 12@ 6'Sections Of Active Hoseline© Hose Cuffs come connected & ready for use 
  • 1 five foot 2" Main Supply Hose with PRV & 1 Quick Connect "T" attached
  • 1 Main exhaust Hose
  • 15 Quick Connect Hose Connectors
  • 10 Quick Connect Inline Manifolds
  • 02 Small Quick Connect T's
  • 10 Extra Hosecuffs
  • 04 Endcap Plugs 
  • 120 wall Injectors
  • 50 Tubing Connectors
  • 50 Tubing Stoppers
  • 1 Rolling Duffel Bag
  • 1 Roll of 50' x 1 1/2" Blank Hose
  • 2 Rolls of 200' x 3/8" Tubing
  • Instructions                                                                                  Order # AHP3  

     

    Patent # US5893216, 6647639 

     

    If you have any questions or would like more information, please send us an e-mail,

     or call us at 800-257-0797, Toll Free within the USA, or 425-822-385, Fax: 425-745-8480

     

    Home Page | Company Info | Distributors | Contact Us | FAQ | Photos | Products | Manuals | Testimonials | Drying Tips

     

    Injectidry® is a registered trademark of Injectidry Systems.
    US Patent #US5893216,6647639 & other patents pending.