|
|
|
|
|
|
|
|
|
|
|
|
The offending overhead 8” pipe was suspended 35’ off the floor
Holes were drilled through the maple to provide access to the flutes and the tongue and groove area beneath the boards.
Plates were then taped airtight over the holes, tubing and manifolds. The hoses were connected to the suction side of the Hp drying systems. Moisture was sucked from the flooring
|
Bakery Dries Without losing Its Bread & Butter! The following job is an example of the versatility of Injectidry drying equipment used by Bales Cleaning & Restoration An 8” overhead sprinkler pipe with 50 pounds of pressure broke and flooded the hardwood floors of the largest bakery in the Seattle area. The bakery was facing a loss of production for months, as well as replacing almost 30,000 square feet of hardwoods! The cost to replace would have incurred millions of dollars. There were thousands of linear feet of conveyers, production lines, ovens and storage racks permanently built over maple flooring over 1 inch thick. Bales had to act quickly to keep the floors from developing mold and swelling, Using Injectidry Specialized Drying Equipment, Bales was able to save the floors and keep the bakery operating 24 hours a day, 7 days a week. Ernie Storrer President
|
|
Home Page | Company Info | Distributors | Contact Us | FAQ | Photos | Products | Manuals | Testimonials | Drying Tips |
